Custom Sprayer Pump Bottles: 60ml & 100ml Wholesale Guide
Short answer: three numbers decide whether a custom sprayer pump bottle works – the capacity, the neck finish and the pump output. Fix the neck finish first, because it locks in which pump, dust cap and trigger will fit. Body shape, colour and decoration stay free to change later. Below are the real dimensions we mould for the sizes our wholesale buyers order most, so you can spec a range once and reuse it across every SKU.
Fix These Three Numbers Before You Order
Most first orders go wrong in the same place: the buyer chooses a capacity, then discovers the pump they wanted does not fit the bottle neck, or that the bottle holds fewer sprays than the label promises. Deciding the three numbers in order removes almost all of that risk.
| Number | What it decides | Wholesale default |
|---|---|---|
| Capacity (ml) | Fill volume, shelf presence, units per carton | 50 ml, 60 ml and 100 ml for cosmetics and personal care |
| Neck finish (mm) | Which pump, dust cap and trigger fit | 18 mm for 60 ml, 18-24 mm for 100 ml and up |
| Pump output (ml per press) | Dose and how many sprays one bottle gives | 0.10-0.12 ml fine mist |
Wholesale Spray Bottle Sizes – Real Dimensions
These are the sizes we hold tooling for, with the measured body diameter and total height. Use them to check that the bottle still fits its final home – a gift box, a shelf tray, a travel pouch – before you commit to a mould.
White PE Series – Compact Cosmetic Sizes
| Capacity | Neck | Body dia. | Total height |
|---|---|---|---|
| 30 ml | 15 mm | 29 mm | 103 mm |
| 50 ml | 20 mm | 33 mm | 121 mm |
| 60 ml (sloped shoulder) | 18 mm | 36 mm | 110 mm |
| 60 ml (rounded shoulder) | 18 mm | 32 mm | 110 mm |
| 100 ml | 18 mm | 39 mm | 137 mm |
| 120 ml | 12 mm | 32 mm | 130 mm |
| 150 ml | 24 mm | 44 mm | 162 mm |
| 200 ml | 22 mm | 52 mm | 170 mm |
| 250 ml | 23 mm | 47 mm | 170 mm |
| 300 ml | 27 mm | 55 mm | 175 mm |
| 500 ml | 26 mm | 62 mm | 220 mm |
Clear PET Fine-Mist Series – Sample and Retail Sizes
| Capacity | Body dia. | Total height |
|---|---|---|
| 5 ml | 22 mm | 69 mm |
| 10 ml | 22 mm | 80 mm |
| 15 ml | 23 mm | 90 mm |
| 20 ml | 22 mm | 92 mm |
| 30 ml | 28 mm | 103 mm |
| 50 ml | 32 mm | 114 mm |
| 60 ml | 35 mm | 119 mm |
| 80 ml | 38 mm | 125 mm |
All sizes are measured manually and may carry a reasonable tolerance; ask us for a dimensioned drawing of the exact SKU you are considering.
The 60 ml PE Grey Spray Bottle
Our 60 ml PE grey spray bottle is the best-selling size in the whole plastic range. Three things make it work for toner, essence mist and hair-care brands:
- Opaque grey PE body – blocks light, so light-sensitive actives such as vitamin C, retinol and natural extracts hold their colour and potency better than in clear PET.
- Two shoulder profiles from one capacity – sloped and rounded both stand 110 mm tall with an 18 mm neck, so the same pump and cap fit either body. You can change silhouette between lines without buying a second pump SKU.
- Compact footprint – 32-36 mm across fits gift sets, travel kits and retail shelf trays without wasted cubic space.
Wholesale supply runs from stock tooling, so lead times stay short and the price does not carry a mould amortisation. If you need the bottle in a colour other than grey – matte black, white, pastel or a Pantone match – we master-batch the PE rather than spray-coat it, so the colour runs through the wall and cannot peel or chip. See the frosted PET spray bottles for the same colour-through approach in a transparent finish.
The 100 ml Custom Sprayer Pump Bottle
The 100 ml custom sprayer pump bottle is the private-label workhorse. At 39 mm diameter and 137 mm tall with an 18 mm neck, it holds roughly 850-1,100 sprays of fine mist depending on pump output – enough for a full retail cycle without the pack feeling bulky.
Because the body is a straight cylinder, it accepts every decoration a brand normally asks for: silk-screen, hot-stamp foil, pressure-sensitive labels and shrink sleeves. Pump heads are interchangeable across fine mist, stream and foam, so one bottle body can serve a facial mist, a body spray and a hand sanitiser simply by changing the closure.
The 50 ml Plastic Spray Bottle – the Sampler Size
At 33 mm diameter and 121 mm tall the 50 ml plastic spray bottle is the standard trial and discovery size. Brands use it for sampler kits, airline-compliant travel sets and gift-with-purchase packs, where the unit cost of the bottle matters more than shelf presence. It shares the same general neck family as the 60 ml, so trial sizes and full sizes can ship with matching pumps – a detail that makes a range look designed rather than assembled.
Neck Finish: Why It Decides Everything
The neck finish is the measurement of the bottle opening – the thread diameter plus the thread profile. Get it wrong and no pump on the market will seat without leaking. Two conventions matter:
- Metric millimetre necks – expressed as the opening diameter, e.g. 15 mm, 18 mm, 20 mm, 24 mm. Common on small PE cosmetic bottles.
- 410 / 415 thread finishes – a three-digit industry code where the first two digits are the diameter in millimetres and the last are the thread profile. 18-410, 20-410 and 24-410 are the standard fine-mist pump threads.
In practice: a 60 ml bottle with an 18 mm neck takes an 18-410 fine-mist pump; a 100-250 ml bottle usually takes 20-410 or 24-410. If you want one pump to serve a whole range, design the range around one neck. We explain the full thread table, dip-tube lengths and pump output curves in the fine mist pump sizes and neck finish guide.
PET or PE – Which Body Is Right?
| Property | PET (clear) | PE (opaque) |
|---|---|---|
| Appearance | Glass-like clarity, shows the liquid level | Opaque; available in any master-batched colour |
| Light protection | None – actives can degrade | Blocks light, protects sensitive formulas |
| Feel | Rigid, premium, thin wall | Softer, squeezable, thicker wall |
| Best for | Toners, setting sprays, sanitizers, clear gels | Vitamin C, retinol, oils, colour cosmetics |
| Decoration | Silk-screen, hot-stamp, label, sleeve | Silk-screen, hot-stamp, label (colour through the wall) |
If you are still deciding between materials, the PET vs HDPE vs PP vs Glass comparison sets out clarity, chemical resistance, cost and MOQ side by side.
What You Can Customise on a Wholesale Order
- Body – capacity, silhouette (sloped, rounded, straight, square), wall thickness, colour by master batch.
- Closure – fine-mist pump, stream sprayer, foam pump, flip-top, trigger or square-gun; colour and finish of the collar.
- Overcap – plain, ribbed, aluminium-look, or matching the pump colour.
- Decoration – silk-screen print, hot-stamp foil, label, shrink sleeve, or full private-label artwork.
- Packaging – retail carton, display tray, poly-bag, or bulk export carton on pallets.
If you are building a brand rather than buying components, the private label plastic bottles guide walks through the seven-step process from design brief to delivered cartons.
MOQ, Samples and Lead Time
- MOQ – low for trial orders, and mixed sizes or colours can be combined so you can test a market before scaling.
- Samples – stock samples of the closest two sizes ship free so you can check dimension, feel and pump output before committing.
- Lead time – stock-tooling sizes move fastest; custom colours or printed decoration add a production cycle.
- Quote – we reply with pricing within 24 hours of receiving your size, head and quantity.
Frequently Asked Questions
What sizes of plastic spray bottles do you manufacture?
We mould 17 capacities from 5 ml to 500 ml across two families: clear PET fine-mist bottles (5-80 ml) and white or coloured PE bottles (30-500 ml), plus trigger and square-gun sprayers from 120-500 ml. The wholesale best-sellers are 50 ml, 60 ml and 100 ml.
What is the MOQ for custom sprayer pump bottles?
MOQ is low for trial orders, and you can combine several sizes or colours in one order to test your market before scaling up. Tell us your target quantity and we will confirm the exact MOQ with the quote.
Can I print my logo on a 60 ml PE grey spray bottle?
Yes. As a factory with in-house decoration we support silk-screen printing, hot-stamp foil, pressure-sensitive labels and shrink sleeves on the 60 ml PE grey body. Send artwork in vector format and we will return a print proof before production.
Which pump fits a 100 ml spray bottle?
Our 100 ml PE bottle has an 18 mm neck, so it takes an 18-410 fine-mist pump. Fine mist, stream and foam pumps are interchangeable on the same bottle body – the closure is the only part that changes.
Are samples free before I place a wholesale order?
Yes. Stock samples of the closest two sizes are free of charge; you cover only the courier if you need them urgently. Samples ship within about 7 days of your request.
How are the bottles packed for export?
Standard export cartons, palletised on request and tested to survive long-distance sea freight. We can also pack in retail cartons or display trays if you need shelf-ready units.
Get Sizes, Samples and a 24-Hour Quote
Tell us the product, the dose per use and your target market, and we will recommend the capacity, send free stock samples of the closest two sizes and quote MOQ within 24 hours. Email jasonfrp@outlook.com or WhatsApp / WeChat +86 155 0328 8839.
Browse the full plastic spray bottle range, the complete bottle catalogue, or compare sizes first in the PET bottle sizes guide. Hengshui Senchuang Technology Co., Ltd. – factory-direct bottles and food packaging, quotes answered within 24 hours.